www.redi-strip.com
British Columbia
Delta
Delta
Other
active
Special attention to seams ensures that the part is truly free of contaminates. Acid etching primers are not recommended for zinc-phosphate coatings. Each steel part is completely submerged in our hot caustic bath ensuring contact with hidden areas such as seams, rolled edges and boxed channels. Our non-destructive electrolytic derusting bath removes the rust from wherever the solution touches. Because the part is fully immersed in the bath every inch is cleaned. Fissures and cracks that were not previously detected are now exposed and the affected areas are ready for repair. All parts are individually pressure-washed with filtered water after every dip process. Because the part is fully immersed, the solution gets into hard-to-reach areas, further enhancing corrosion protection. This provides a much stronger surface for paint and insulates the steel from underpaint corrosion. As a value-added service, Redi-Strip offers a spray applied iron-phosphate coating that provides excellent results. After steel parts are free of paint, grease, dirt and undercoating, only the rust remains to be removed. Ft. Non-destructive Paint Stripping and Degreasing. Aluminum parts and pot metal castings are stripped in our cold bath. These parts must be kept separate from steel body products. (ID tags must be removed). Is a world class industrial metal cleaning company specializing in non-destructive paint stripping, degreasing, electrolytic rust removal, pickling, and, metal substrate coatings. Headquartered near Vancouver, Canada - our facilities include a 30,000 sq. State of the art center - including advanced large electrolytic cleaning tanks with lifting capabilities to 20 tons. The company serves a vast array of industries including but not limited to the following:. He most complete paint removal process in the industry without pitting or warping. For superior paint adhesion and underpaint corrosion protection, our microcrystalline zinc-phosphating bath is the perfect complement to your newly cleaned steel part. The bath converts the steel surface into an electrically non-conductive, crystalline coating
No affiliations
No associations
ServiceRating
Redi-Strip Metal Cleaning Canada Ltd does not yet have a rating. At this time, there are no reviews or comments for this contractor.
If you have personal experience with Redi-Strip Metal Cleaning Canada Ltd, we encourage you to share that experience with our ServiceRating.ca community. Your opinion is very important and Redi-Strip Metal Cleaning Canada Ltd will most certainly appreciate the feedback.
Profile ID: SRCA-CON-O-58438